Inhaler

Description

The Beurer Inhaler is made with compressed air technology with a compressor and a short inhalation time. It is ideal for the care of the upper and lower respiratory tract, through the application of medications. It is pleasant thanks to the short inhalation time. Contains European plug type C.

Indication

Characteristics of the Inhaler (IH 21) from Beurer

• Compressed air technology with compressor
• A higher percentage of particles enter the lungs
• short inhalation time
• Working pressure: approx. 0.8 - 1.45 bar
• Wide range of accessories
• Accessory compartment
• can be disinfected
• Atomization degree: approx. 0.3ml/min
• Medical device
• Operation with connection to the electrical network

Intake mode

It is recommended to clean and disinfect the nebulizer and accessories before the first use, following the instructions in the manual. Then open the nebulizer by turning the top counterclockwise from the medicine cup. Insert the nozzle into the medicine container. Make sure the medication guide cone is seated properly over the air guide cone inside the nebulizer. Fill the nebulizer with isotonic saline or medication directly into the medication cup. Do not fill it to overflowing. The maximum recommended capacity is 8 ml. Use only medications prescribed by your doctor and find out the proper duration and number of inhalations. If the prescribed amount of medication is less than 2 mL, add isotonic saline to a minimum of 4 mL. It is also necessary to dilute the drug when it is viscous. Observe the prescription in this case as well. Close the nebulizer by turning the top part clockwise relative to the medication container. Make sure it is closed properly. Attach the blue valve by pressing it into the opening at the top of the nebulizer.

Storage conditions

Store at room temperature, in a cool, dry place.

Composition of Inhaler

Compressor, Adult Mask, Children's Mask, Nebulizer, Mouth Tube, Nose Tube.